Intex SF80220-2
, 50 H Z , 250 W, Hmax 5 m Hmin 0.19 m IPX4
, 50 H Z , 450 W, Hmax 7.5 m Hmin 0.19 m IPX4
, 50 H Z , 550 W, Hmax 7.5 m Hmin 0.19 m IPX4
Need help? Post your question in this forum.
Register and keep informed
Receive emails when:
- new questions and answers are posted
- new manuals are uploaded
Intex
Content of pages
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 OWNER’S MANUAL English 342A IMPORTANT SAFETY RULES Please read, understand, and follow all instructions carefully before installing and using this product. Keep for future reference. Model SF80220-2 220-240 V
, 50 HZ, 250 W, Hmax 5 m Hmin 0.19 m IPX4 Model SF70220-2 220-240 V
, 50 HZ, 450 W, Hmax 7.5 m Hmin 0.19 m IPX4 Model SF60220-2 220-240 V
, 50 HZ, 550 W, Hmax 7.5 m Hmin 0.19 m IPX4 MAX. WATER TEMPERATURE 35°C For illustrative purposes only. Don’t forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine retailers or visit our website. Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance, which may result in updates to the instruction manual without notice. ©2018 Intex Marketing Ltd. — Intex Development Co. Ltd. — Intex Recre .
Page 2
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A TABLE OF CONTENTS Warnings. 3 Parts References. 4-5 Setup Instructions . 6-13 Product Specifications. 8 Operating Instructions . 14-16 Intex Pools Operating Time Table. 17 Non-Intex Pools Operating Time Table. 18 Maintenance. 19 Long Term Storage. 20 Troubleshooting Guide. 21 Common Pool Problems. 22 General Aquatic Safety. .
Page 3
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. READ AND FOLLOW ALL INSTRUCTIONS WARNING • Always supervise children and those with disabilities. • Children must stay away from this product and electrical cord(s). • Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Assembly and disassembly by adults only. • Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter .
Page 4
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. 2 12 19 11 1 20 13 14 3 35 15 5 4 6 16 18 32 37 17 36 39 7 10 9 * 23 41 24 8 * 25 21 21 22 22 * 23 28 43 41 23 42 27 * 44 20 34 33 38 23 28 30 21 21 22 22 24 19 26 25 40 29 31 » * «: These parts are not included if this pump was not purchased as part of a pool set. Contact our Authorized Service Centers to order these parts if needed. NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale. SAVE THESE INSTRUCTIONS Page 4 342A .
Page 5
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English REF. NO. DESCRIPTION 1 2 3 4 5 6 7 PRESSURE GAUGE 6-WAY VALVE DRAIN OUTLET COVER CLAMP TANK O-RING SAND SHIELD CENTER PIPE HUB 8 LATERAL 9 10 11 12 13 14 15 16 17 18 19 20 21* 22* 23* 24* 25* 26* 27* 28* 29* 30* 31* 32 33 34 35 36 37 38 39 40* 41* 42* 43* 44* 45* DRAIN VALVE CAP DRAIN VALVE O-RING L-SHAPE O-RING HOSE WITH NUTS SAND FILTER INTERCONNECTING HOSE LEAF TRAP NUT LEAF TRAP O-RING BASKET FILTER HOUSING NUT L-SHAPE O-RING AIR RELEASE VALVE/SEDIMENT RELEASE VALVE VALVE O-RING PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED) HOSE O-RING STEP WASHER STRAINER NUT FLAT STRAINER RUBBER WASHER THREADED STRAINER CONNECTOR ADJUSTABLE POOL INLET JET NOZZLE ADAPTOR B STRAINER CONNECTOR POOL INLET JET NOZZLE STRAINER GRID SCREW PUMP MOTOR & CONTROL PRE-FILTER ASSEMBLY LEAF TRAP COVER SAND FILTER PUMP MOTOR INLE .
Page 6
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A POOL OUTLET — STRAINER & PLUNGER VALVE SETUP (optional) The strainer grid prevents large objects from jamming and/or damaging the filter pump. If your pool has an inflatable top ring, install the strainer, nozzle and plunger valve before inflating the pool liner top ring. The part numbers here onward refer to the parts depicted in the Parts List section of this manual. To install, do the following: 1. In a counter-clockwise motion unscrew plunger valve union from the threaded strainer connector (26) (see drawing 1). Be careful not to lose the step rubber washer (23). Place the plunger valve on the ground in a safe place. 2. In a counter-clockwise motion unscrew the strainer nut (24) from the threaded connector (26). Leave the flat washer (25) on the connector (26). 3. Install the strainer and plunger valve at the lower position of pool outlet (marked «+»). From the inside of t .
Page 7
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A POOL INLET — NOZZLE & PLUNGER VALVE SETUP (optional) 1. In a counter-clockwise motion unscrew plunger valve union from the inlet threaded air connector (42) (see drawing 5). Be careful not to lose the step rubber washer (23). Place the plunger valve on the ground in a safe place. 2. In a counter-clockwise motion unscrew the strainer nut (24) from the inlet threaded air connector (42). Leave the flat washer (25) on the connector (42). 3. Install the nozzle and plunger valve at the upper position of pool inlet. From the inside of the pool liner insert the nozzle union (27 & 42) into one of the pre-cut holes with the washer remaining on the connector to be placed against the inside of the liner wall. 4. Before assembly, lubricate the threads with a petroleum jelly. Then, with the flat side of the strainer nut (24) facing the outside wall of the liner in a clockwise motion screw th .
Page 8
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English PRODUCT SPECIFICATIONS The sand filter removes suspended particles but does not sanitize your pool. Pool chemistry is a specialized area and you should consult your local pool service specialist for details. Model: Power: Wattage: Maximum working pressure: Effective filtering area: Pump flow rate (at pump outlet): Recommended filtering media quantity: Recommended filtering media (Not included): Limited Warranty: SF80220-2 220-240 Volt AC 250 W 2 bar (30 psi) 0.07 m2 (0.79 ft2) 7.9 m3/h (2100 GPH) SF70220-2 SF60220-2 220-240 Volt AC 220-240 Volt AC 450 W 550 W 2 bar (30 psi) 2 bar (30 psi) 0.1 m2 (1.07 ft2) 0.13 m2 (1.44 ft2) 3 10.5 m /h (2800 GPH) 12 m3/h (3200 GPH) No. 20 silica sand No. 20 silica sand No. 20 silica sand 23 Kg (50 Lbs) or glass 35 Kg (77 Lbs) or glass 55 Kg (120 Lbs) or glass sand 16 Kg (35 Lbs). sand 25 Kg (55 Lbs). sand 38 Kg (85 Lbs). No .
Page 9
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A SETUP INSTRUCTIONS (continued) 4. In a clockwise motion screw filter housing nut (17) onto the motor water inlet (see drawings 12.1 & 12.2). 12.2 12.1 17 17 5. Replace the basket (16) and leaf trap cover (14) back to the pre-filter housing (see drawings 13.1 & 13.2). 13.1 14 35 13.2 16 19 Sand tank installation: 1. 2. 3. Place the tank support base at the selected location. Place the tank on the tank support base (see drawing 14.1). Connect the motor pre-filtering assembly unit to the tank support base (see drawing 14.2). NOTE: Ensure the pre-filter housing water inlet hose connection is facing towards the pool. IMPORTANT: Some countries, especially in the European community, require the product to be secured to the ground or to a base in a permanent upright position. Check your local authorities to determine if there is a regulation in your area reg .
Page 10
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A SETUP INSTRUCTIONS (continued) Sand loading: IMPORTANT: Use No. 20 silica sand or glass sand with particle size range 0.45 to 0.85 mm (0.018 to 0.033 inches) and a Uniformity Coefficient less than 1.75. Only use the filter media specified by the manufacturer. NOTE: Before loading the tank with sand, ensure the center pipe hub assembly is securely in place at the bottom of the tank, and vertically centered inside the tank. 1. 2. Place the sand shield (6) over the top of the center pipe. Pour the sand into the tank at a slow rate (see drawing 15). Fill the tank approximately half way, remove the sand shield (6) from the top (see drawing 16). 15 16 6 6 3. 4. Evenly distribute the sand inside the tank, then fill the tank with some water to provide a cushioning effect when the remaining sand is poured in. This prevents the center pipe hub (7) from excessive shock (see .
Page 11
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A SETUP INSTRUCTIONS (continued) WARNING Improper tank valve and clamp assembly could cause the valve and clamp to blow off and cause serious injury, property damage or death. 6-way valve installation: 1. Lower the 6-way valve over the tank slowly, and ensure the bypass pipe protruding underneath the 6-way valve fits securely into the center pipe hub (7) top opening (see drawing 19). IMPORTANT: There are three hose connection ports on the 6-way valve, ensure the outlet connection (from filter to the pool) on the valve is facing towards the pool, and the inlet connection (from motor to valve) is aligned with the motor outlet (see drawing 20). 19 WATER INLET 20 WATER OUTLET 7 2. 3. Place an L-shape o-ring (11) on the 6-way valve inlet connection and on the pump motor outlet. In a clockwise motion connect the sand filter interconnecting hose (13) between the .
Page 12
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A SAND FILTER PUMP HOSE CONNECTION SETUP WARNING • • • • Keep this product more than 2m away from the pool. Keep this product more than 3.5m away from the pool (for France only). Keep the plug of this product more than 3.5m away from the pool. Position this product away from the pool, so as to prevent children from climbing on it and accessing the pool. The 6-way valve has three hose connection ports. 1. Connect one hose (12) end to the pre-filter inlet and the other end of the hose to the lower plunger valve with the strainer. Ensure the hose nuts are securely tightened. 2. Connect the second hose (12) between the 6-way valve water outlet and the upper plunger valve with the inlet-nozzle. Ensure the hose nuts are securely tighten. 3. The third hose connection port (drain/waste outlet) on the 6-way valve shall be directed to a proper draining receptacle using a hose or pipe .
Page 13
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A SAND FILTER PUMP HOSE CONNECTION SETUP (continued) For NON-INTEX pool: Connect the hose (12) to the pool inlet/outlet connection with a large hose clamp. Tighten securely. LARGE HOSE CLAMP 12 POOL 3 For INTEX pool with 1-1/4” (32mm) connections/hoses: Make sure the air jet valve (41) is securely tighten onto the pool inlet air adaptor (43) and facing up. 23 28 (Adaptor B) 43 41 44 30 23 28 (Adaptor B) SAVE THESE INSTRUCTIONS 29 31 Page 13 .
Page 14
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A OPERATING INSTRUCTIONS WARNING • Risk of electric shock. Connect this product only to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI) or residual current device (RCD). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI/RCD. Use a qualified electrician to install the GFCI/RCD, which has a maximum rate of 30mA. Do not use a portable residual current device (PRCD). • To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or converter plugs to connect unit to electric supply; provide a properly located outlet. • Do not attempt to plug in or unplug this product while standing in water or when your hands are wet. • Never operate this product above the maximum working pressure stated on the filter tank. • Always switch off pump before changing the 6-way valve position. • Opera .
Page 15
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A OPERATING INSTRUCTIONS (continued) Initial startup and operation: Before operating, be sure that: • All the hoses have been connected and tightened securely, and correct amount of filter sand have been loaded. • The entire system is connected to a grounding type receptacle protected by a ground-fault circuit interrupter (GFCI) or residual current device (RCD). CAUTION The filter control valve has a closed position. The pump should never be on when the valve is in the closed position. If the pump is operated with the valve closed, explosive situation could exist. 1. Turn both plunger valve handles fully counter-clockwise until they stop. This opens the valves to allow water to flow into the sand filter pump. With water flowing into sand filter pump, the water pressure will allow the air trapped inside to escape from the air release valves (19). When all the air has escaped water w .
Page 16
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A OPERATING INSTRUCTIONS (continued) Operating the system under “TIMER” mode or manually: To operate the sand filter pump in “FILTER” mode under “TIMER” control: 1. Activate the unit: Press button. Flashing code “00” appears on the LED display, indicating that the unit is ready to be programmed. 2. Set operating hours: With code “00” flashing, press button to set the desired operating hours. See the “Operating Time Table” for the required operating hours related to each pool size. Pressing will increase the time from 01 to 12 hours maximum. If you have selected too many hours keep pressing to repeat the cycle. The built-in timer will now activate the Sand filter pump, at the same time each day, for the (1 to 12 hours max per cycle) number of hours you have set. 3. Lock keypad controls: With the desired hour value showing, press button until you hear a “beep”. Locking the cont .
Page 17
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A INTEX POOLS OPERATING TIME TABLE (WITHOUT INTEX SALTWATER SYSTEM) This table shows the required operating time for average use of the sand filter pump with above ground pools. If the system is attached to an “Intex Saltwater System” unit, the filter pump running time should be longer than the required operating time of the Intex Saltwater System unit. Pool Size Water Capacity (Calculated at Sand filter pump operating 90% for Frame Pool and 80% for time (For one cycle) / (Hours) Easy Set & Oval Pool) (Gals) (Liters) SF80220-2 SF70220-2 SF60220-2 INTEX ABOVE GROUND POOLS (AGP’s) EASY SET® POOL ROUND METAL FRAME POOL ULTRA FRAME POOL 457cmx84cm (15’x33″) 2587 9792 2 — — 457cmx91cm (15’x36″) 2822 10681 2 — — 457cmx107cm (15’x42″) 3284 12430 2 — — 457cmx122cm (15’x48″) 3736 14141 3 — — 488cmx107c .
Page 18
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A NON-INTEX POOLS OPERATING TIME TABLE This table shows the required operating time for average use of the sand filter pump with above ground pools. Water Capacity Sand filter pump operating time (For one cycle) / (Hours) (Gals) (Liters) SF80220-2 SF70220-2 SF60220-2 3000 11355 2 — — 4000 15140 3 2 2 4440 16805 3 3 2 5000 18925 4 3 3 6000 22710 4 3 3 7000 26495 5 4 3 8000 30280 5 4 4 9000 34065 6 5 4 10000 37850 7 5 5 11000 41635 7 6 5 12000 45420 8 6 5 13000 49205 9 7 6 14000 52990 9 7 6 15000 56775 10 7 7 16000 60560 10 8 7 17000 64345 11 8 7 18000 68130 12 9 8 19000 71915 12 9 8 20000 75700 — 10 .
Page 19
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A MOTOR PRE-FILTER CLEANING AND MAINTENANCE It is essential to change any damaged element or set of elements as soon as possible. Use only parts approved by the manufacturer. 1. Make sure the filter pump is switched off, then disconnect the power cord from the electrical outlet. 2. Turn both plunger valve handles fully clockwise until they stop. This closes the valve, prevents the water from flowing out of the pool. 3. Release the pressure first by opening the sediment release valve (19) located on the lower side of the pre-filter housing (see drawing 30). 30 2 1 19 4. In a counter-clockwise motion unscrew the leaf trap cover (14), then remove the basket (16) and leaf trap o-ring (15) from the pre-filter housing (see drawing 31). 31 14 35 16 15 5. Empty and flush the basket using a garden hose, may use a plastic brush to remove deposits from the basket. Do not us .
Page 20
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A POOL CARE & CHEMICALS • • • • • • • • All pools require care to keep the water clear and hygienically clean. With proper chemical control, your filter will help attain this objective. Consult your pool supply dealer for instructions regarding the proper use of chlorine, algaecide and other chemical agents required for sparkling clear water. Keep pool chemicals away from children. Do not replenish chemicals in pool while pool is occupied. Skin or eye irritations could occur. Daily pH checking and chemical treatment of the water is very important and cannot be overemphasized. Chlorine, algaecide and maintenance of proper pH levels are required when filling the pool as well as during the season. Consult your local swimming pool supply store for instructions. The season’s first filling of the pool may have brackish water requiring extra water additives and extra filtering time. D .
Page 21
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A TROUBLESHOOTING GUIDE TROUBLE CAUSE SOLUTION FILTER MOTOR FAILS TO START • The motor is not plugged in. • The GFCI/RCD circuit breaker is tripped. • Motor too hot and overload protection is shut off. • Line cord must be plugged into a 3 wire outlet that is protected by a Class A Ground Fault Circuit Interrupter, or RCD. • Reset circuit breaker. If circuit breaker trips repeatedly, your electrical system may have a defect. Turn off circuit breaker and call an electrician to correct the problem. • Let the motor cool down and restart again. • • • • • • Adjust the chlorine and pH level. Consult your local swimming pool supply stores. • Load with filter sand, see “sand loading instructions”. • Set valve to “FILTER” position. • Operate the filter for longer periods. • Clean the strainer screen at the inlet. FILTER DOESN’T CLEAN POOL Improper chlorine o .
Page 22
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A COMMON POOL PROBLEMS PROBLEM DESCRIPTION CAUSE SOLUTION ALGAE • Greenish water. • Green or black spots on pool liner. • Pool liner is slippery and/or has a bad odor. • Chlorine and pH levels need adjustment. • Super chlorinate with shock treatment. Correct pH to your pool store’s recommended level. • Vacuum pool bottom. • Maintain proper chlorine level. COLORED WATER • Water turns blue, brown, or black when first treated with chlorine. • Copper, iron or maganese in water being oxidized by the added chlorine. • Adjust pH level to the recommended level. • Run filter until water is clear. FLOATING MATTER IN WATER • Water is cloudy or milky. • «Hard water» caused by a too high pH level. • Chlorine content is low. • Foreign matter in water. • Correct the pH level. Check with your pool dealer for advice. • Adjust the chlorine leve .
Page 23
(342IO) SAND FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/11/2018 English 342A LIMITED WARRANTY PARTS LIST Your Sand Filter Pump has been manufactured using the highest quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. This limited warranty applies only to the Sand Filter Pump and accessories listed below. This limited warranty is in addition to, and not a substitute for, your legal rights and remedies. To the extent that this warranty is inconsistent with any of your legal rights, they take priority. For example, consumer laws across the European Union provide statutory warranty rights in addition to the coverage you receive from this limited warranty: for information on EU-wide consumer laws, please visit the European Consumer Center website at http://ec.europa.eu/ consumers/ecc/contact_en/htm. The provisions of this limited warranty apply only to the original purchaser and are no .
Report abuse
Libble takes abuse of its services very seriously. We’re committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we’ll investigate it and take the appropriate action. We’ll get back to you only if we require additional details or have more information to share.
Источник